- Effective method for removing wheel hubs. The use of wheel bearing set V4598 is recommended here. The set also functions with steering knuckles with uneven and limited surfaces
- Allows the wheel bearings to be changed directly on the vehicle with minimum effort
- Mounting washers with a diameter of 62 – 83 mm and support discs of 34 – 60 mm are included. The bearing shell is for wheel bearings of up to 92 mm in diameter
- Dimensions: 393 mm x 282 mm x 35 mm
Wheel bearing tool set ∙ standard ∙ removal / installation
Order number: V4906N
EAN 4047728077255
€2,166.40 *Unverbindlich empfohlener listenpreis
- Insert measurement / drawer size M (282 x 393 mm)
- Width 282 mm
- Length 393 mm
- Height 35 mm
- Steuersatz (für Artikel-Listenpreis DE Euro1) 19 %
Artikelnr. | Bezeichnung |
---|---|
V3060 | Counterholder |
V4594-1 | Pressure foot set ∙ for V4594 |
V4598-30 | Pressure pipe ∙ length 78 mm ∙ for V4598 ∙ V4599 |
V4598-3 | Support disc ∙ tapered ∙ ∅ 43.8 mm ∙ for V4598 ∙ V4599 |
V4598-12 | Bearing washer ⌀ 65.8 – 66.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4629 | Wheel hub removal tool ∙ universal |
V4598-14 | Bearing washer ⌀ 72.5 – 74.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4598-20 | Bearing shell ∙ ∅ 93 mm ∙ for V4598 |
V4598-13 | Bearing washer ⌀ 68.8 – 70.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4598-16 | Bearing washer ⌀ 80.8 – 82.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4598-22 | Bearing shell ∙ ∅ 82 mm ∙ for V4598 |
V4614 | Support disc ∙ tapered ∙ ∅ 33.8 mm ∙ for V4598 |
V4598-11 | Bearing washer ⌀ 63.8 – 64.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4598-4 | Support disc ∙ tapered ∙ ∅ 59.8 mm ∙ for V4598 |
V4598-2 | Support disc ∙ tapered ∙ ∅ 38.8 mm ∙ for V4598 |
V4598-10 | Bearing washer ⌀ 61.8 – 62.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V4598-21 | Bearing shell ∙ ∅ 76 mm ∙ for V4598 |
V4598-15 | Bearing washer ⌀ 76.5 – 78.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
V2867N | Circlip tool |