- Manual pressure spindle set for mechanical operation of specialty tools
- Included in the set are four thrust rods of varying lengths with which the use of different tools is guaranteed
- Use with
V3072 ∙ V2858N ∙ V3147 ∙ V3649 ∙ V3148 ∙ V2885 ∙ V2920 and V2937 - Spindle and adapter are designed especially for pneumatically supported operation, making work with an impact wrench up to a maximum of 1000 Nm tightening torque possible
- Effective transfer of spindle forces is at a maximum of 15 tonnes
- In the case of frequent work with supporting joints, bushes and drive shafts, we recommend using the 8.5 – 22 tonne hydraulic cylinder
- Mechanical drive
- The benefits for you:
- Valuable and durable due to the high quality of the material (12.9 quality)
- Flexible application: suitable for impact operation. Compatible with all pulling and pushing systems
- Cost-efficient alternative to hydraulic cylinders
- Additional impact function under load
- Optimised thread pitch of the spindles adapted to the enormous power transmission
Pressure spindle set ∙ manual
Order number: V4699
EAN 4047728046992
€467.08 *Unverbindlich empfohlener listenpreis
- Stückanzahl 10
- Wallmek-No 01-00039
- Steuersatz (für Artikel-Listenpreis DE Euro1) 19 %
| Artikelnr. | Bezeichnung |
|---|---|
| V4699-1 | Pressure spindle ∙ M30 |
| V4699-4 | Press axle ∙ 50 x ⌀ 19 mm |
| V4699-2 | Adapter ∙ 1.1⁄2″ ∙ M30 |
| V4699-6 | Press axle ∙ 56 x ⌀ 24 mm |
| V4699-7 | Press axle ∙ 100 x ⌀ 24 mm |
| V4699-5 | Press axle ∙ 85 x ⌀ 19 mm |
| V4699-3 | Washer ⌀ 18.8 x 3 mm (4 pieces) |
| Artikelnr. | Bezeichnung |
|---|---|
| V2858N | Press frame for changing supporting joints and ball joints of stabilizers |