- Allows the wheel bearings to be changed directly on the vehicle with minimum time spent
- Together with hydraulic cylinder or manual spindle
- All parts are adapted for the wheel bearing sizes currently found on the market
- The mounting washers have a guide and are usable on both sides
- Mounting washers with ⌀ 62 – 83 mm and support discs of 34 – 60 mm are included, the bearing shell is for wheel bearings of up to ⌀ 92 mm
- Removal of the wheel hub with V4629 ∙ V2849 and V3072
- Working time: approx. 20 – 30 minutes per side
- Wheel alignment and brake bleeding not necessary
- Not necessary to remove the ABS sensor, steering knuckle, strut or steering tie rod
Wheel bearing, drive axle and wheel hub set ∙ universal
Order number: V4598
EAN 4047728045988
€857.40 *Unverbindlich empfohlener listenpreis
- Stückanzahl 16
- Wallmek-No 01-00035
- Steuersatz (für Artikel-Listenpreis DE Euro1) 19 %
| Artikelnr. | Bezeichnung |
|---|---|
| V3060 | Counterholder |
| V4598-30 | Pressure pipe ∙ length 78 mm ∙ for V4598 ∙ V4599 |
| V4598-3 | Support disc ∙ tapered ∙ ∅ 43.8 mm ∙ for V4598 ∙ V4599 |
| V4598-12 | Bearing washer ⌀ 65.8 – 66.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-14 | Bearing washer ⌀ 72.5 – 74.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-20 | Bearing shell ∙ ∅ 93 mm ∙ for V4598 |
| V4598-13 | Bearing washer ⌀ 68.8 – 70.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-16 | Bearing washer ⌀ 80.8 – 82.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-22 | Bearing shell ∙ ∅ 82 mm ∙ for V4598 |
| V4614 | Support disc ∙ tapered ∙ ∅ 33.8 mm ∙ for V4598 |
| V4598-11 | Bearing washer ⌀ 63.8 – 64.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-4 | Support disc ∙ tapered ∙ ∅ 59.8 mm ∙ for V4598 |
| V4598-2 | Support disc ∙ tapered ∙ ∅ 38.8 mm ∙ for V4598 |
| V4598-10 | Bearing washer ⌀ 61.8 – 62.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-21 | Bearing shell ∙ ∅ 76 mm ∙ for V4598 |
| V4598-15 | Bearing washer ⌀ 76.5 – 78.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| Artikelnr. | Bezeichnung |
|---|---|
| V3060 | Counterholder |
| V4598-30 | Pressure pipe ∙ length 78 mm ∙ for V4598 ∙ V4599 |
| V4598-3 | Support disc ∙ tapered ∙ ∅ 43.8 mm ∙ for V4598 ∙ V4599 |
| V4598-12 | Bearing washer ⌀ 65.8 – 66.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-14 | Bearing washer ⌀ 72.5 – 74.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-20 | Bearing shell ∙ ∅ 93 mm ∙ for V4598 |
| V4598-13 | Bearing washer ⌀ 68.8 – 70.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-16 | Bearing washer ⌀ 80.8 – 82.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-22 | Bearing shell ∙ ∅ 82 mm ∙ for V4598 |
| V4614 | Support disc ∙ tapered ∙ ∅ 33.8 mm ∙ for V4598 |
| V4598-11 | Bearing washer ⌀ 63.8 – 64.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-4 | Support disc ∙ tapered ∙ ∅ 59.8 mm ∙ for V4598 |
| V4598-2 | Support disc ∙ tapered ∙ ∅ 38.8 mm ∙ for V4598 |
| V4598-10 | Bearing washer ⌀ 61.8 – 62.8 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |
| V4598-21 | Bearing shell ∙ ∅ 76 mm ∙ for V4598 |
| V4598-15 | Bearing washer ⌀ 76.5 – 78.5 mm ∙ inside hole diameter 20.25 mm ∙ suitable for spindle M20 |